7-BIT SumCDTV Panduan Pengguna - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Adaptor 7-BIT SumCDTV. 7-BIT SumCDTV 14 halaman.

When pressing and holding the Bootloader button, one should connect the device via USB A-A cable to the PC running Windows. After

being recognized by Windows OS, adapter switches into Bootloader mode which is confirmed with continuous pulsation of the Status LED.

The next required step is to launch on the connected Windows PC SumFlasher application that will update firmware of the adapter.

When application detects connected Sum adapter it will enable Open Hex File button. Firmware update procedure looks as follows:



One should press Open Hex File button and choose a file containing updated firmware image (which results in enabling

Programming and Reset Device buttons).



One should press Programming button and wait for the flashing process to complete.



After completion of the flashing process, one should press Reset Device button, which switches Sum back into normal operation

mode allowing its disconnecting from the PC.

Having followed the above procedure one can connect the adapter back to the Amiga

All files required for the updating procedure can be downloaded from

Sum

Status

Bootloader button and status LED location for SumCDTV

http://retro.7-bit.pl

website.

Bootloader