Gaggenau AH 590-120 Petunjuk Pengoperasian dan Perakitan Asli - Halaman 10
Jelajahi secara online atau unduh pdf Petunjuk Pengoperasian dan Perakitan Asli untuk Kap Ventilasi Gaggenau AH 590-120. Gaggenau AH 590-120 18 halaman. Freely suspended insular hood
Juga untuk Gaggenau AH 590-120: Manual Petunjuk Pengoperasian dan Perakitan (18 halaman)
Halaman Cetak
4. Cleaning and care
Fig. 13
Fig. 14
Cleaning the grease filters
The grease filter saturation display F flashes after
an operating time of 30 hours to indicate that you
should clean the grease filters (see Fig. 3). The
grease filters can of course be cleaned at any time,
even if the grease filter saturation display has not
started to flash.
The stainless steel grease filters can be removed
easily for cleaning (see Fig. 13):
Disconnect the power supply (switch off the fuse).
Grip the grease filter handle and push the slide
towards the rear. Then pull the grease filter down-
wards out of the holder; repeat the operation for the
other grease filters.
You can clean the stainless steel grease filters in a
dishwasher at a maximum temperature of 65°C,
where it should be supported vertically to allow
food or rinsing residues to drain off.
If possible, the inner parts of the housing should be
wiped out in hot rinsing water when replacing the
filters.
Caution:
when cleaning the inside of the housing, beware of
protruding parts.
After having cleaned them, re-insert the grease
filters in the extractor hood in reverse order.
Note:
the handles of the grease filters must be visible
after assembly.
Press the F key to set the elapsed hours counter to
zero. Flashing of the indicating lamp goes off.
9