DAYCO D165DC Panduan Operator - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Operator untuk Alat crimp DAYCO D165DC. DAYCO D165DC 19 halaman.

D165 SERIES HOSE CRIMPING

Slide the Pusher into position on the hydraulic ram

Recheck the fitting for correct alignment and depress the

pneumatic Start/Stop switch bulb. Keep it depressed until the crimper

shuts off automatically.

Measure the finished fitting diameter to be certain that it is

within the crimp specification tolerances.

If multiple fittings are being crimped set the Coupling Stop to

automatically position the fitting and set the Ram Retraction Stop to

limit the ram retraction to the position where the hose and fitting can

just be easily removed.

Magnets embedded in the Pusher will retract the Compression Cone

with the Pusher while still permitting the Compression Cone to align

correctly for the next crimping operation.

COUPLING STOP

RAM RETRACTION STOP

Page