Gaggenau CE 261 Buku Petunjuk - Halaman 11
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Kompor Gaggenau CE 261. Gaggenau CE 261 16 halaman. Glass ceramic cooktop
Juga untuk Gaggenau CE 261: Panduan Pengguna (16 halaman)
Halaman Cetak
Timer
You can use the integrated timer to select a time
between 1 and 90 minutes in 1-minute levels and, after
this time, the cooking zone is switched off (cooking
timer). You can set the cooking time for each cooking
zone.
Setting the automatic cooking time
The hob must be switched on with the main switch.
1
Select the cooking zone. Within 5 seconds, set
the required heat setting.
Within the next 5 seconds, touch the M symbol.
2
‹‹ lights up on the timer display. s lights up
next to the heat setting display.
3
Use the number buttons to set the required
cooking time of between 1 and 90 minutes.
When the cooking time has elapsed, the cooking zone
switches off. ‹ flashes in the heat setting display. A
signal sounds for three minutes. ‹‹ flashes in the
timer display. Touch any sensor button. The displays
go out and the audible signal ceases.
To find out the remaining cooking time for a cooking
zone, select the cooking zone. The cooking time is
displayed for 5 seconds.
If you have set a cooking time for several cooking
zones, the shortest cooking time set will be shown
counting down in the timer display. A s segment of a
circle lights up on the timer symbol for this cooking
zone.
Note: If you have set ™†£. in the options menu
(unlimited selection time for cooking zone selection),
the timer is called up if you touch the M symbol once.
Touch the M symbol a second time to call up the
automatic cooking time function for the selected
cooking zone.
Changing the cooking time
Select the cooking zone. Touch the M symbol.
Change the cooking time.
Cancelling prematurely
Select the cooking zone. Touch the M symbol. Set it
to ‹‹. The display goes out after a few seconds. The
cooking zone continues to heat with the selected heat
setting.
Note: The cooking timer is no longer active if there is
a power cut.
Short-term timer
You can also use the integrated timer independently of
the function of the appliance as a short-term timer.
The short-term timer can also be used if all of the
cooking zones are switched off.
Setting the timer
The hob must be switched on with the main switch. No
cooking zone should have been selected.
Touch the M symbol.
1
‹‹ lights up on the timer display.
2
Set the required time.
If all cooking zones are off, the appliance goes into
standby. Only the timer display lights up.
Once the time has elapsed, the ‹‹ display flashes. A
signal sounds for three minutes. Touch the M symbol.
The display goes out and the audible signal ceases.
To correct the time, touch the M symbol and change
the time.
Note: The timer no longer functions after a power cut.
11