Agriframes 30525-TBK Petunjuk Perakitan - Halaman 2
Jelajahi secara online atau unduh pdf Petunjuk Perakitan untuk Perabotan Luar Ruangan Agriframes 30525-TBK. Agriframes 30525-TBK 4 halaman. Classic 1.5m gothic gazebo- matt black
Halaman CetakAssembly Instructions Classic Gothic Gazebo Matt Black 1.5m
Please read these instructions carefully prior to assembly.
Assembly will require a Tape Measure, Spirit Level, and a Rubber Mallet.
Tips:
Before positioning the Spacer Bars on the uprights, half screw in the grub screws to the Ring Clamps on the Spacer Bars, to
reduce the risk of losing the screws.
Once correctly positioned tighten the grub screw to secure the spacer bar to the uprights.
Positioning of the Spacer Bars
In many cases the position of the horizontal bars is down to personal preference. However, if you have the lattice option you
will need to leave the correct distance between bars.
Lattice Panel Option
For illustrative purposes we have only shown one side fixed with the lattice panels. Attach panels to both sides as you proceed.
Create the Top Section of the Gazebo...
1. Tap an end plug into the 'shallower' or inverted curve end of the Gothic Curves.
2. Gather the ends of the Gothic Curves, with the end plugs, together.
3. Referring to Figure 1, place the Wood Block in the Inner Clamp assembly. Assemble the Gothic
curves by fastening between the Parallel Clamp and the Inner Clamp, using the long bolts to the
bottom and the short bolts to the top. Do not fully tighten at this stage.
4. Slide a 2 way joint onto every other Gothic Curve, do not tighten the connectors.
5. Slide a spacer bar onto the ends of the on the Gothic curves. This will determine the correct spacing
between the curves, adjust the position of the Gothic curves if required. Refer to Figure 2.
6. Once satisfied with the positioning of the curves tighten the screws on the finial assembly.
6. Place the Finial in the Wooden Block.
7. Slide the top ring sections through the 2 way joints then connect them together.
Refer to Figure 2.
8. Slide a moisture seal over each join, level the ring evenly and fix in place.
7. Place the Finial in the Wooden Block.
9. Tighten the screws of the Finial Clamp Assembly.
8. Slide the top ring sections through the 2 way joints then connect them together.
10. Slide a spacer bar onto the ends of the on the Gothic curves. This will determine the correct spacing
9. Slide a Moisture seal over each join, level the ring evenly and fix in place.
between the curves, adjust the position of the Gothic curves if required. Once satisfied with the
10. Tighten the screws of the Finial clamp Assembly.
positioning of the curves tighten the screws on the finial assembly. Refer to Figure 2.
11. Ensure that Top Ring is concentric and level to the Gazebo, once satisfied tighten the 2-Way
11. Slide a moisture seal over the non-reduced ends of the pieces of the Top Ring.
Connectors onto the Top Ring and onto the Gothic Curves.
12. Push a Top Ring pieces through the 2-Way connectors on the Gothic curves. Attach the poles to one
another, covering the joins between the poles with a moisture seal.
13. Ensure that the Top Ring is concentric and level to the Gazebo, once satisfied tighten the 2-Way
Connectors onto the Top Ring and onto the Gothic Curves.
Product code: 30525-TBK
Please read the assembly instructions carefully prior to construction.
Figure 1: Attaching the Finial to the Gothic Curves
Agriframes, Journal house, Hartcliffe Way, Bristol, BS3 5RJ
Orderline: 0117 934 1790 Fax: 0117 934 17 91
Order on-line: www.agriframes.co.uk