Daylab Daylab 35 Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Printer Daylab Daylab 35. Daylab Daylab 35 17 halaman. Slide printer for polaroid

Halaman Cetak

Connecting the power supply

Plug the Daylab 35 power supply

(110 125 VAC) into an appropriate

electrical outlet and then into the

connection on the back of the Daylab 35.

Determining the processing time

of the film

Processing times vary for different film

types. Also, temperature affects the

processing time of your film. Check your

film instructions for the recommended

processing time so you can select the

appropriate film-exposure settings and

make any necessary adjustments to the

Daylab 35 preset film-processing times.

These settings are discussed in detail in

the next section, Setting the exposure

controls.

Setting the exposure controls (7)

On the front of the Daylab 35 are the 4

controls that you need to make an

exposure: the film-type selection switch,

the

switch, the

VIEW-OFF-PRINT

exposure-adjustment dial, and the

button.

The film type selection switch:

Daylab 35 has three exposure settings,

preset for specific Polaroid instant films.

For Tvpe 665 black-and-white

Setting 1

positive/negative film with a speed of ISO

75/19°. The Daylab 35 preset

film-processing time is 30 seconds.

For Type 669 Polacolor

Setting 2

extended-range film with a speed of ISO

80/20°. The preset film-processing time is

60 seconds.

For Polacolor 679, Type 689

Setting 3:

ProVivid, and Polapan Pro 100 Type 664

films, with a speed of ISO 100/21°. The

preset film-processing time is 90 seconds

for Type 679 and 689 films. Type 664 film

has a 30-second development time; time

the development manually.

START

The