75F HYPERSTAT HS3600 Panduan Instalasi - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Peredam Api dan Asap 75F HYPERSTAT HS3600. 75F HYPERSTAT HS3600 11 halaman.

PRECAUTIONS

• Do not fail to wire devices with the correct polarity, when using a shared transformer may result

in damage to any device powered.

• Turn off the power before wiring.

• Never connect or disconnect the wiring with the power turned on.

• Do NOT allow live wires to touch the circuit boards.

• Install in accordance with all state and local codes.

• Do not assemble the front plate of the HyperStat to the back plate, when the power is ON.

FEATURES

• Control of up to 3 stages of heating/cooling or fan or modulating capacity equipment.

• Built in sequences for occupancy detection.

• Over the air firmware updates.

• Mounting on existing gang boxes in horizontal or vertical orientation

• Has inbuilt sensors to monitor temperature, relative humidity, Ambient light, Occupancy, CO2,

VOC and PM2.5(optional)

• Has up to 6 Relays for HVAC control and 3 Analog outputs for actuator control/dimming

• The Hyper Stat can power from 24V AC/ DC supply.

• Consumes less than 2W of power

+1 888 612 7575 (USA) or 1800 121 4575 (INDIA)

support75F.io|