Dynabrade 13519 Keselamatan, Pengoperasian Dan Pemeliharaan - Halaman 8
Jelajahi secara online atau unduh pdf Keselamatan, Pengoperasian Dan Pemeliharaan untuk Alat Listrik Dynabrade 13519. Dynabrade 13519 9 halaman. 1 hp dynastraight 6" extension, governor controlled, 1,800/3,400/4,500/6,000 rpm with 5/8" or 1" combination arbor/with 1/2" diameter arbor, with 5/8"-11 threaded arbor
Halaman Cetak
®
Dynaswivel
•
Swivels 360° AT TWO PIVOT POINTS allowing the air hose to
drop directly to the floor while providing superb tool handling.
95461 – 3/8" NPT.
51989 Repair Collar
•
Specially designed collar for use in vise to prevent damage
to valve body of tool during disassembly/assembly.
Dynabrade Air Lube
•
Formulated for pneumatic equipment.
•
Absorbs up to 10% of its weight in water.
•
Prevents rust and formation of sludge.
•
Keeps pneumatic tools operating longer
with greater power and less down time.
95842: 1pt. (473 ml)
95843: 1gal. (3.8 L)
95542 Grease 10 oz.
•
Multi-purpose grease for all types of bearings, cams, gears.
•
High film strength; excellent resistance to water, steam, etc.
•
Workable range 0˚ F to 300˚ F.
95541 Push-type Grease Gun
•
One-hand operation.
Bearing Press Tools
•
Used to install bearings.
96243: For installing 02057 Bearing.
96244: For installing 01007 & 54520 Bearings.
53199 Handle Mount
53163 Handle Assembly
•
Improved ergonomic feel with grip-traction to
reduce hand fatigue.
All Dynabrade portable pneumatic power tools are rigorously inspected and performance tested in our factory before shipping to our customers. If a Dynabrade tool develops
a performance problem and an inherent defect is found during normal use and service, Dynabrade will warrant this tool against defects in workmanship and materials for
the lifetime of the tool. Upon examination and review at our factory, Dynabrade shall confirm that the tool qualifies for warranty status, and will repair or replace the tool at
no charge to the customer. Normally wearable parts and products are NOT covered under this warranty. Uncovered items include bearings, contact wheels, rotor blades,
regulators, valve stems, levers, shrouds, guards, O-rings, seals, gaskets and other wearable parts. Dynabrade's warranty policy is contingent upon proper use of our tools
in accordance with factory recommendations, instructions and safety practices. It shall not apply to equipment that has been subjected to misuse, negligence, accident or
tampering in any way so as to affect its normal performance. To activate lifetime warranty, customer must register each tool at www.dynabrade.com. Dynabrade will not
honor lifetime warranty on unregistered tools. A one-year warranty will be honored on all unregistered portable pneumatic power tools. Lifetime warranty applies only to
portable pneumatic tools manufactured by Dynabrade, Inc. in the USA. Lifetime warranty applies only to the original tool owner; warranty is non-transferable.
Reference Contact Information
1. American National Standards
Institute – ANSI
25 West 43
rd
Street
Forth Floor
New York, NY 10036
Tel: 1 (212) 642-4900
Fax: 1 (212) 398-0023
Visit Our Web Site: www.dynabrade.com
DYNABRADE, INC., 8989 Sheridan Drive • Clarence, NY 14031-1490 • Phone: (716) 631-0100 • Fax: 716-631-2073 • International Fax: 716-631-2524
DYNABRADE EUROPE S.àr.l.,
© DYNABRADE, INC., 2013
Optional Accessories
Lifetime Warranty
2. Government Printing Office – GPO
Superintendent of Documents
Attn. New Orders
P.O. Box 371954
Pittsburgh, PA 15250-7954
Tel: 1 (202) 512-1803
Zone Artisanale • L-5485 Wormeldange—Haut, Luxembourg • Telephone: 352 76 84 94 1 • Fax: 352 76 84 95 1
3. Power Tool Institute, Inc.
P.O. Box 818
Yachata, Oregon 97498-0818
Tel: 1 (503) 547-3185
Fax: 1 (503) 547-3539
Email: [email protected]
96532 Motor Tune-Up Kit
•
Includes assorted parts to help maintain
and repair motor.
Drop-In Motor
•
Allows quick and easy replacement.
No motor adjustments needed.
01903 – 6,000 RPM
01904 – 4,500 RPM
01905 – 1,800 & 3,400 RPM
94465 Wheel inflation Tool
•
Controlled inflation/deflation of
pneumatic wheel.
•
Has 1/4" female thread; fits 1/4" air hose.
•
95633 Nozzle replacement available.
94472 Pneumatic Wheel
•
Easily regulate hardness by air pressure.
•
Inflates to 20 PSI maximum.
53698 Carrier Wrench
•
Carrier Wrench has a 3/8 in. square
socket for use with 3/8 in. drive; breaker
bar, ratchet head, or torque wrenches.
96005 Male Plug
•
Provides up to twice the air flow
compared to standard plug design.
•
Plug has "ported" design to prevent
"starving" of the air tool.
95281 – 19mm Open-end Wrench.
53699 Carrier Wrench
•
3 Sided wrench to for use with
6,000 RPM models.
4. European Committee for Standardization
Rue de Stassart 36
B - 1050 Brussels, Belgium
DYNABRADE
PRINTED IN USA
®