Active-semi HYDRA-X10 Panduan Pengguna - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Motherboard Active-semi HYDRA-X10. Active-semi HYDRA-X10 16 halaman. Power application controllers

Halaman Cetak

Serial Communications

The HYDRA-X10 module also contains a fully operational USB to UART serial communications link the user

can utilize to communicate with the PAC5210's serial port. This connection is enabled by default at the

factory. In the event the user desires to utilize a different serial communications source, the S2 DIP switch

must be configured to separate the USB 2 UART resource from the PAC5210 microcontroller.

Figure 5 depicts how to flip the S2 DIP switches 1 and 2 depending on which UART serial communications

source is to be employed.

Figure 5 S2 DIP Switch UART Channel Selection

Rev 1.0 June 2014