Gaggenau RB 292 Panduan Petunjuk Pengoperasian - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Pembeku Gaggenau RB 292. Gaggenau RB 292 20 halaman.
Juga untuk Gaggenau RB 292: Petunjuk Penggunaan Manual (19 halaman)
Halaman Cetak
Aligning the appliance
Place the appliance in the designated location and
align. The appliance must be level. If the floor is
uneven, use the front height-adjustable feet. Adjust
the height-adjustable feet with a socket wrench.
Note
The appliance must be upright. Please align it with
a spirit level.
Connecting the appliance
After installing the appliance, wait at least 1 hour until
the appliance starts up. During transportation, the oil
contained in the compressor may run into the
refrigeration system.
Before switching on the appliance for the first time,
clean the interior. See Cleaning the appliance.
6
Electrical connection
The socket must be near the appliance and also freely
accessible following installation of the appliance.
The appliance complies with the protection class I.
Connect the appliance to 220–240 V/50 Hz
alternating current via a correctly installed socket with
protective conductor. The socket must be fused with
a 10 to 16 A fuse.
For appliances operated in non-European countries,
check whether the stated voltage and current type
match the values of your mains supply match the
values of the mains supply. These specifications can
be found on the rating plate.
:
Warning
Never connect the appliance to electronic
energy saver plugs.
Our appliances can be used with mains and sine-
controlled inverters. Mains-controlled inverters
are used for photovoltaic systems which are
connected directly to the power supply system.
Sine-controlled inverters must be used for
isolated applications (e.g. on ships or in
mountain lodges) which are not connected
directly to the national grid.