ADEMCO Ademco VISTA-20P Panduan Memulai Cepat - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Sistem Keamanan ADEMCO Ademco VISTA-20P. ADEMCO Ademco VISTA-20P 6 halaman. Programming auto arming and disarming schedules
Juga untuk ADEMCO Ademco VISTA-20P: Panduan Instalasi Cepat (2 halaman), Manual Pemrograman (17 halaman), Panduan Pengguna (20 halaman), Manual Pemrograman (17 halaman), Panduan Instalasi Cepat (2 halaman), Panduan Instalasi Cepat (2 halaman), Manual Pemrograman (2 halaman), Panduan Cepat (2 halaman)

Step 6: If you address your keypad 17, enter programming mode by entering

"installer code + 800". Field 20 (Installer Code Field) will be displayed. Enter data

field "*190". Then enter "1 0" to enable your keypad. Then enter *99 to exit.

Programming Function Keys:

*57 Function Key Programming

Defaults

Function Key A Zone 95

Function Key B Zone 99

Function Key C Zone 95

Function Key D Single Button Page

Step 1: Press Function Key to program (A = Top to D = Bottom Function Key)

Step 2: Display shows Function Key chosen (* for next, # for previous menu)

Step 3: Choose Function for this Key (* for next, # for previous menu)

00 = A Zone 95 B = Zone 99 C = Zone 96 D = Single Button Page

01 = Single Button Page (sends 999-9999 message to Pager

02 = Display Time

03 = Arm Away

04 = Arm Stay

05 = Arm Night/Stay (any Zone in User List 3)

06 = Step Arming (Stay then Night/Stay then Away)

07 = Device A Activation (Type 66 Function in *80 menu)

08 = Communication Test

09 = Macro Key 1 (Activated by User Code + # + 66)

10 = Macro Key 2 (Activated by User Code + # + 66)

11 = Macro Key 3 (Activated by User Code + # + 66)

12 = Macro Key 4 (Activated by User Code + # + 66)

Step 4: Enter next Function Key or 0 to exit

Step 5: Press * or # to exit