DYNABREEZE FA-23082 Panduan Pengguna & Garansi - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Pengguna & Garansi untuk Kipas angin DYNABREEZE FA-23082. DYNABREEZE FA-23082 8 halaman. Heavy duty 450mm oscillating floor fan
Juga untuk DYNABREEZE FA-23082: Petunjuk & Panduan Pengguna (8 halaman)
ELECTRICAL REQUIREMENTS &
SPECIFICATIONS
ELECTRICAL REQUIREMENTS
Voltage:
Australia
220V -
240V
WARNING: This appliance must be earthed.
IMPORTANT: The wires in this fans mains
lead are coloured in accordance with the
following code:
Green and Yellow: Earth
Blue:
Brown:
EXTENSION CABLES
If an extension cable is to be used, it is
recommended that a splash proof cable
connector be fitted and that this connector
be kept clear of any water.
Since the cable will produce a voltage
drop, it is essential that the wiring in the
cable conforms the following minimum
specifications:
0-25metre cable length = 1.5mm wire
25-50metre cable length = 2.5mm wire
SPECIFICATIONS
Diameter:
450mm
1350 rpm
Frequency:
Power:
50/60Hz
Neutral
Live
Speed:
Air Delivery:
120 M
3
USING YOUR DYNABREEZE FAN
UNPACKING AND FIRST USE
1. Unpack the unit from box that your
unit was purchased in and recycle the
120W
packaging if possible.
2. Check that all the parts are included on
the unit and nothing is broken. If you
require assistance, please contact the
place of purchase.
3. Read and follow this manual and adhere
to all safety precautions.
4. Plug the power cable into a suitable
power outlet and switch on the power
outlet.
5. Turn On the fan by turning the speed
control dial from 0 (zero) to 1,2 or 3,
depending on the fan speed required.
6. Turn Off the fan by turning the control dial
back to the 0 (zero) position, then turn off
at the mains power switch.
MAINTENANCE AND CARE
Before each use, check the unit for damage
to ensure the body and cable are completely
sound.
Periodically inject a few drops of grease into
the moving parts and ensure the bearings are
oiled.
/min
Store this unit in a clean dry environment.
USER MANUAL & WARRANTY 5