DYNABREEZE FA-23181 Instruksi Panduan Pengguna & Garansi - Halaman 5
Jelajahi secara online atau unduh pdf Instruksi Panduan Pengguna & Garansi untuk Kipas angin DYNABREEZE FA-23181. DYNABREEZE FA-23181 8 halaman. Industrial 450mm caution: read the assembly & safety instructions before operating and retain for future reference wall fan
Juga untuk DYNABREEZE FA-23181: Panduan Pengguna & Garansi (12 halaman)
Halaman Cetak
ASSEMBLY & OPERATION
Tools required
Drill
Assembling the fan
1. Locate the bag that contains the wall
mounting hardware.
2. Select location to place it on the wall.
Ensure power supply is nearby and
NOTE:
power cord is not too tight or in a position to
interfere with oscillating function.
3. Ensure the wall is suitable to support
the fan:
- If mounting to a plastered wall, then the
wall mount must be fitted to a stud behind
the plaster wall using the screws provided.
- If mounting to a brick or masonry wall,
ensure plugs and screws used are suitable.
- Suitable fixings must be used and must
support a minimum of 8.5kg. Always check
the suitability of plugs and screws for
installation before use.
The fan must be mounted vertically.
NOTE:
To assist in mounting the fan, a wall
TIP:
mounting drilling diagram is provided on
the last page of this manual. Pre-drilling
and fixing the mounting screws can be
performed without having to hold the fan
in place.
plaster
/
brick
masonry
INSTRUCTION USER MANUAL & WARRANTY 5
studs