Aircraft Automation ECOTRIM Panduan Pilot - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pilot untuk Sistem Autopilot Aircraft Automation ECOTRIM. Aircraft Automation ECOTRIM 18 halaman. Trim system

Halaman Cetak

Aircraft Automation

1 The ECOTRIM Trim System operation

1.1

Purpose

This Pilot's Manual provides a general description, basic operation procedures, in-flight

operation procedures and operating parameters configuration for the Aircraft

Automation ECOTRIM Trim System.

The ECOTRIM Trim System is a tool provided to assist pilots with cockpit workload. The

ability of the ECOTRIM to provide proper assistance is directly proportional to the pilot's

knowledge of its operating procedures. It is highly recommended that the pilot

develops a profound understanding of the autopilot its controls, its operation modes,

and operations procedures. Pilots should also be familiar with the ECOTRIM controller

operations.

THE ECOTRIM Trim System IS FOR EXPERIMENTAL AIRCRAFT ONLY AND CAN ONLY

BE USED FOR DAY VFR FLIGHT TRIMING, PILOT SUPERVISION IS REQUIRED AT ALL

TIMES. IFR NOT APPROVED.

CONTROL WARNING:

trim your airplane. DO NOT INSTALL VERY LARGE TRIM TABS THAT

WILL UNABLE THE PILOT TO EASILY CONTROL THE AIRPLANE IN

CASE OF A SERVO RUNAWAY.

5 |

P a g e

Note:

This Trim System needs very little authority to

ECOTRIM Trim System