DynAccess Hydra Monoski Panduan Pemilik - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Robotika DynAccess Hydra Monoski. DynAccess Hydra Monoski 16 halaman.

adjust preload, rebound damping and high/low speed compression damping of your shock.

With some more effort you can change spring rate(s) and crossover point of a dual rate spring

setup. For adjusting your shock, please refer to the Shock Manual.

Using the Chairlift

The standard Hydra is not equipped with a lift mechanism. Due to the unique height of the

bucket seat above the ski, loading onto a lift is in most cases simple and can be done with the

use of outriggers or with the assistance of one or two ski buddies. Please note that you sit

differently on different chairlifts. Pay special attention when you ride the chairlift at ski resorts

that you are not familiar with. Always check any chairlift slowly and carefully before committing

to ride it.