DynAccess Hydra Monoski Panduan Pemilik - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Robotika DynAccess Hydra Monoski. DynAccess Hydra Monoski 16 halaman.

recommend you take it to a specialized workshop or contact us directly before

riding.

➢ For fitting you in the bucket seat, see p.9

➢ For footrest adjustment, see p.9

➢ For adjusting the center of gravity, see p.8

➢ For adjusting the ride height, spring rate, rebound and compression damping,

please see the separate Shock Manual.

2. Mechanical Safety Check

➢ Routinely check the condition of your monoski before each use (e.g. loose bolts

and nuts, cracks, fraying straps, etc.).

➢ In tightening the fasteners (e.g. nuts, bolts, and screws) on your monoski, use

correct tightening torque. Incorrect tightening torque can result in component

damage or failure.

➢ Make sure that the tri-glides used for non-sewn side-release buckles prevent the

belts from slipping out of the buckles.

➢ Check the condition of the shock absorber for any visible damage and oil

leakage.

➢ Check the rebound and compression damping of the shock absorber.

3. General Safety on the slope

➢ Spend considerable time and effort to learn how to get on a chairlift, to sit on it

safely, and to get off safely. Some chairlift seats are very thick and lead to you sit

closer to the edge. Make sure you sit in a stable and secure manner without any

risk of falling off. See "Using the Chairlift" section of this manual for details.

➢ If you are a beginner and/or are not familiar with ski slopes, always ski with a

certified instructor.

➢ If you ride the monoski independently, make sure that you have enough

knowledge and skills to ride it safely and under full control at all times.

➢ Ski on properly prepared ski slopes.

➢ Observe the rules on the slopes.

➢ Always wear a helmet which meets the latest certification standards and is

appropriate for the type of skiing you do.

➢ Always wear ski gloves and goggles.

➢ Start slowly on easier terrain and build up your skills.

➢ Be familiar with how your suspension works as it changes the way your monoski

performs.

➢ Avoid skiing alone.

➢ Avoid riding the lift alone.

➢ If you want to adjust the shock absorber on the slope, find a relatively flat place

where there is no heavy traffic.

➢ Ride at speeds appropriate for the conditions. Higher speed in general means

higher risk.