DYNACO DYNALOGIX II DY 4000 Panduan Kelistrikan - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Kelistrikan untuk Pengontrol DYNACO DYNALOGIX II DY 4000. DYNACO DYNALOGIX II DY 4000 14 halaman.

DY 4000

Run Timers

3.0

Setting the Open and Glose Run Timers

The Open Run Timer and Close Run Timer act as a failsafe, to prevent the

door from running continuously, when open or close limit switch fail to stop

door. These timers should be set for a period that exceeds the duration of a full

open or close cycle.

1. Press and release Open Run Timer button on the Dynalogix ll controller.

The display will change to: Opening_Time=##. See figure 3.0-1.

Open/Close

Run Timers

F i g u re 3.0 - 1 : Ru n Timer s

2. Use the Up and Down arrow buttons to change the countdown time to the

desired duration. The Dynalogix llwill automatically save any changes that

are made. See Figure 3.0-2.

lncrease

Setting

Decrease

Setting

Figure 3.0-2: Raise/Lower Run Timers

3. Repeat steps 1 and 2 to set the Close Run Timer.

DYNACO USA, INC,

7k.4eddtt? wDaon Sdltlll &Deo,aVa