CEL ZICM2410-EVB3 Panduan Referensi - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Referensi untuk Motherboard CEL ZICM2410-EVB3. CEL ZICM2410-EVB3 19 halaman. Zic2410 series

Halaman Cetak

may be pressed and released after the slider switch has been set). In order to return to

'NORMAL' mode after programming has completed, simply slide the slider switch to 'NORMAL'

and press and release the 'RESETB' pushbutton.

4.4

POWER HEADER (J4)

This header allows the powering of the ZICM2410 module directly (bypassing the regulator)

through Pin #3 and allows the monitoring of the module's supply line through Pin #4 (SENSE+).

4.5

LEDs

The ZICM2410-EVB3 includes four colored LEDs. They are connected to various GPIOs of the

ZICM2410 module through an inverter as shown in Figure 6. To turn on a LED, the

corresponding GPIO pin must be set high. To turn off a LED, the GPIO pin must be cleared (set

low).

LED #

LED 1

LED 2

Rev C

ZICM2410-EVB3 Hardware Reference Guide

Figure 4 – Photo, ISP Switch

Table 9 – Power Header (J4) Pin Out

Pin 1

Pin 2

GND

GND Module

(SENSE–)

(Supply)

Figure 5 - Photo, LEDs

Table 10 – LED Colors and Connections

Color

GPIO

White

Port 0[3]

Amber

Port 0[2]

Figure 6 – Drawing, LEDs Schematic

Document No. 0007-05-08-03-001

Pin 3

Pin 4

VCC Module

(Supply)

(SENSE+)

LED #

Color

LED 3

Green

LED 4

Blue

GPIO

Port 0[1]

Port 3[0]

Page 14 of 19