Daymak MATT85 3504 Manual - Halaman 2
Jelajahi secara online atau unduh pdf Manual untuk Printer Daymak MATT85 3504. Daymak MATT85 3504 20 halaman.
Halaman Cetak
WARNING: Failure to follow listed safety instructions may result in electric
shock, fire, death, injury or damage to the printer or other property. Read
all safety instructions before using the printer.
•
Printers can be damaged if dropped, compressed, punctured, bent, exposed to high
temperatures or placed in contact with liquid. Printers should be inspected before each
use for signs of damage.
o Printer should not be used if water or other liquid spills into the product as this
may result in electrocution, fire or other injury.
o Printer should not be used if exterior casing is warped, bent, punctured or bulging
as this may result in electrocution, fire or other injury.
•
Do not press your hands or fingers against the cutter when removing printed paper or
loading/replacing roll paper due to the potential for injury.
•
Cables can be damaged due to improper use, twisting, bending as well as over time and
should be inspected prior to each use for signs of damage.
o Do not use the power cable if it is damaged due to risk of fire or electrocution.
o Do not use the power plug if there is dust or foreign matter attached.
•
In the following cases, immediately unplug and contact the CMC Service Center for advice:
o If the product emits smoke, a strange odor, or unusual noise.
o If water or other liquid spills into the product.
o If the product is too hot to touch or the case is deformed.
•
Printer should be repaired by an authorized service provider only.
o Do not attempt to open printer casing or perform repairs as this may result in
damage to the printer or injury.
o Do not attempt to access or change printer battery as this can cause damage to
the battery which may result in overheating or injury.
•
Printer should only be utilized with approved accessories.
o Use of incompatible power or USB cords may result in damage to the printer or
injury.
o Do not use the product with any power supply or volt¬age other than the ones
specified.
o Do not connect cables in ways other than those men¬tioned in the manual.
•
Multiple, excessive loads on the power outlet (wall outlet) should not be used due to the
risk of fire.
•
Printer and accessories should not be used in or near water or handled while hands are
wet due to risk of electrocution.
•
The inside of the printer should only be accessed/touched as described in the user manual
to prevent electrocution or other injury.
THE DIFFERENCE IS NIGHT AND DAY.
ENG-1
™