CEL MeshConnect ZICM0900P0-1CU Lembar Data Awal - Halaman 5
Jelajahi secara online atau unduh pdf Lembar Data Awal untuk Unit Kontrol CEL MeshConnect ZICM0900P0-1CU. CEL MeshConnect ZICM0900P0-1CU 15 halaman. 868/900 mhz transceiver based modules, development kits
Halaman CetakTRANSCEIVER IC
The MeshConnect Sub-G modules are based on the Silicon Labs Si1000 and Si1002 SOC transceiver ICs. These ICs
incorporate the RF transceiver with the baseband modem, a hardwired MAC, and an embedded 8051 microcontroller,
offering a high performance solution for all Sub-G applications.
For more information about the Silicon Labs ICs, visit http://www.silabs.com.
ANTENNA
The MeshConnect Sub-G modules include RF connectors for external antenna options only (There is no trace antenna
option). The following options are supported by CEL:
•
U.FL connector
•
RP-SMA connector
•
A Connection for 1/4 wave wire antenna in place of RP-SMA
Here are some design guidelines to help ensure antenna performance:
•
Never place the antenna close to metallic objects.
•
In the overall design, ensure that wiring and other components are not placed near the antenna.
•
Do not place the antenna in a metallic or metalized plastic enclosure.
•
Keep plastic enclosures 1cm or more from the antenna in any direction.
ADDITIONAL FLASH MEMORY (Optional)
The Silicon Labs Transceiver ICs (Si1000 and Si1002) have an embedded 64kB of flash. Additional memory (1MB) can be
mounted on the module (as an option) to enable Over The Air (OTA) programming capability.
This is a custom solution as an option for all part numbers.
MeshConnect™ Sub-G Module Series
Page 5