HiB Essence 60 Manual - Halaman 2

Jelajahi secara online atau unduh pdf Manual untuk Perabotan Dalam Ruangan HiB Essence 60. HiB Essence 60 4 halaman.

Halaman Cetak
Please Note
This product can only be recessed fitted into a wall. Before installing ensure you take note of
measurements of the recessed area and the side fixing points inside the cabinet carcass (See Fig. B & E).
You may need to remove the door(s) to make it easier to fit. This can be done by removing the hinges (See
Fig.A). DO NOT FIT SHELVES AT THIS STAGE.
Fixing Preparation
Before installation, ensure the construction of the partition wall is suitable to accommodate the size
and weight of a recessed cabinet.
Ensure there are no hidden pipes or cables in the wall you are drilling or cutting into.
1.
Measure the dimension of the cabinet carcass (but not the front aluminium fascia).
2.
Using these dimensions, take a soft pencil and mark the outline for the required aperture in the
wall. Take great care to mark this accurately, straight and level.
3.
Using an appropriate tool, cut out the aperture in the wall where the cabinet will fit (See Fig. B).
4.
If it is necessary, install supporting baton(s) or noggin(s) around the recessed area (See Fig. C) to
which the cabinet can be secured. These supports must be completely vertical and parallel to the
cabinet to prevent the cabinet twisting when fitted.
5.
Manoeuvre the cabinet into the wall aperture (See Fig. D).
6.
Using a suitable screwdriver or drill, secure the cabinet into the wall aperture, via two holes with
the supplied screws (two on each side) (See Fig. E).
7.
Adjust the shelf support brackets to your desired height ensuring the matching brackets are
level. This is done by slightly loosening the screw, do not remove the screw completely. Once
in position tighten screw to secure the bracket and put the glass shelf into shelf support bracket
(See Fig.F).
8.
If the door(s) were removed at the beginning of this process, carefully reattach the door(s) (See
Fig.A).
Care Instructions
Do not use abrasives or solvents when cleaning this product.
Wipe off all water spillages as soon as possible using a soft, damp cloth.
Aftercare Service
In the unlikely event that this product should fail please contact HiB customer services, contact details
shown on the back page.
(Fig. A)
2