HiB Zenith 73105500 Petunjuk Pemasangan - Halaman 2

Jelajahi secara online atau unduh pdf Petunjuk Pemasangan untuk Perabotan Dalam Ruangan HiB Zenith 73105500. HiB Zenith 73105500 2 halaman. Illuminated mirror

HiB Zenith 73105500 Petunjuk Pemasangan
Operating Instructions
To turn illumination on or off, operate the sensor switch located at the
bottom of the mirror.
Heated Pad is only on when mirror is illuminated.
Zenith only; charging socket is suitable for recharging
toothbrushes. NB. On first use of the shaver ocket, inserting the
shaver plug may prove to be stiff. Reasonable force may be required
to fully insert the plug. Make sure that the mirror is held firmly so that it
is not pushed off the wall. After a few uses, stiffness will ease and the
socket will function as normal.
Bulb Replacement
Maxi requires 2 x T5 bulbs, Maximum 21 Watts
Zenith requires 2 x T5 bulbs, Maximum 14 Watts
CAUTION: The surface of the bulb may become extremely hot!
Allow at least 30 minutes after bulb failure before replacing...
1.
Turn off the mains electrical supply and disconnect the wiring
between the mains electrics and the mirror.
2.
Remove the back plate on the reverse of the mirror.
3.
Carefully grasp the failed bulb and rotate 90° anti-clockwise
and remove the bulb from the bulb holder.
4.
Carefully push the replacement bulb into the bulb holder and
rotate 90° clockwise to secure.
5.
Replace the back plate on the reverse of the mirror.
Care Instructions
Do not use abrasives or solvents when cleaning this product.
Wipe off all water spillages as soon as possible using a
soft, damp cloth.
Aftercare Service
In the unlikely event that this product should fail please contact HiB
customer services, details shown below.
T:
+44 (0)20 8441 0352
F:
+44 (0)20 8441 0219
Building 3, North London Business Park, Oakleigh Road South, New Southgate, London. N11 1GN
©HiB Copyright: No part of this document may be reprinted or duplicated without HiB consent. All sizes and measurements are approximate, but we do try and make sure they are as accurate as possible. In the
interest of continuous product development, HiB reserves the right to alter specifications as necessary. E & OE.
E:
hib.co.uk
WEEE compliance
Must not be mixed with general household waste