Aircraft in Miniature Limited TRANSPORT WINGS DC-10-30 KIT Petunjuk Manual - Halaman 15

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Mainan Aircraft in Miniature Limited TRANSPORT WINGS DC-10-30 KIT. Aircraft in Miniature Limited TRANSPORT WINGS DC-10-30 KIT 20 halaman. 1:72 mixed-media kit of the dc-10-30 second generation jet airliner

Halaman Cetak
Aircraft in Miniature Limited TRANSPORT WINGS DC-10-30 KIT Petunjuk Manual
EMERGENCY OPENING
1 PULL OPERATING HANDLE OUT
OF FUSELAGE
2 ROTATE EMERGENCY OVER
RIDE LEVER FROM SAFE
POSITION TO EMERGENCY
POSITION AND HOLD
3 ROTATE OPERATING LEVER
TO EMERGENCY POSITION
EMERGENCY
SAFE
MANUAL DRIVE
1. PULL HANDLE OUT
2. ROTATE HANDLE TO
FREE FALL
3. INSERT 1/4" SQUARE DRIVE
INTO SOCKET AND RESERT AS
INDICATED
4. MAXIMUM OPERATING TORQUE
100 IN LBS AT 500 RPM
CLOSE
OPEN
7A
7B
EMERGENCY OPENING
1 PULL OPERATING HANDLE OUT
OF FUSELAGE
2 ROTATE EMERGENCY OVER
RIDE LEVER FROM SAFE
POSITION TO EMERGENCY
POSITION AND HOLD
3 ROTATE OPERATING LEVER
TO EMERGENCY POSITION
EMERGENCY
SAFE
MANUAL DRIVE
1. PULL HANDLE OUT
2. ROTATE HANDLE TO
FREE FALL
3. INSERT 1/4" SQUARE DRIVE
INTO SOCKET AND RESERT AS
INDICATED
4. MAXIMUM OPERATING TORQUE
100 IN LBS AT 500 RPM
CLOSE
OPEN
8D
AIR CONDITIONING
EQUIP. SYS 1
AIR CONDITIONING
EQUIP. SYS 2
JACK POINT
8A
NOTE 1: REMOVE THESE PANELS
FOR B CAL AIRCRAFT.
7F
STENCIL DECALS ON RIGHT FORWARD FUSELAGE
8D - TYPICAL FOR ALL
LEFT SIDE DOORS
SEE NOTE 2 FOR B CAL AIRCRAFT
8E
8F
ALTERNATE STATIC PORT
DO NOT PLUG OR DEFORM HOLES
AREA WITHIN RED LINE MUST BE
SMOOTH AND CLEAN
STENCIL DECALS ON LEFT FORWARD FUSELAGE
7L - TYPICAL FOR ALL
SEE NOTE 1 FOR B CAL AIRCRAFT
STATIC PORT
DO NOT PLUG OR DEFORM HOLES
AREA WITHIN RED LINE MUST BE
SMOOTH AND CLEAN
CAPTAIN
7C
FIRST
7G
OFFICER
7D
7E
NOTE 2: REMOVE THESE PANELS
FOR B CAL AIRCRAFT.
T
N
O
I
P
K
C
A
J
8B
RIGHT SIDE DOORS
JACK POINT
VALVE-SAFETY, CABIN PRESSURE
DO NOT PLUG OR DEFORM
HOLES IN STATIC PORTS,
7H
STATIC PORT
DO NOT PLUG OR DEFORM HOLES
AREA WITHIN RED LINE MUST BE
SMOOTH AND CLEAN
8C
EMERGENCY OPENING
1 PULL OPERATING HANDLE OUT
OF FUSELAGE
2 ROTATE EMERGENCY OVER
RIDE LEVER FROM SAFE
POSITION TO EMERGENCY
POSITION AND HOLD
3 ROTATE OPERATING LEVER
TO EMERGENCY POSITION
EMERGENCY
SAFE
MANUAL DRIVE
1. PULL HANDLE OUT
2. ROTATE HANDLE TO
FREE FALL
3. INSERT 1/4" SQUARE DRIVE
INTO SOCKET AND RESERT AS
INDICATED
4. MAXIMUM OPERATING TORQUE
100 IN LBS AT 500 RPM
CLOSE
OPEN
7L
CONDITIONED AIR
GROUND CONNECTION
7M x 2
AIR CONDITIONING
EQUIP. SYS 3
7N
JACK POINT
CONDITIONED AIR
GROUND CONNECTION
7K
ALTERNATE STATIC PORT
DO NOT PLUG OR DEFORM HOLES
AREA WITHIN RED LINE MUST BE
SMOOTH AND CLEAN
7J
EMERGENCY OPENING
1 PULL OPERATING HANDLE OUT
OF FUSELAGE
2 ROTATE EMERGENCY OVER
RIDE LEVER FROM SAFE
POSITION TO EMERGENCY
POSITION AND HOLD
3 ROTATE OPERATING LEVER
TO EMERGENCY POSITION
EMERGENCY
SAFE
MANUAL DRIVE
1. PULL HANDLE OUT
2. ROTATE HANDLE TO
FREE FALL
3. INSERT 1/4" SQUARE DRIVE
INTO SOCKET AND RESERT AS
INDICATED
4. MAXIMUM OPERATING TORQUE
100 IN LBS AT 500 RPM
CLOSE
OPEN
CAPTAIN
FIRST
OFFICER