GREAT PLANES Sport Float Kit ARF Buku Petunjuk - Halaman 16

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Mainan GREAT PLANES Sport Float Kit ARF. GREAT PLANES Sport Float Kit ARF 16 halaman.

Halaman Cetak

Great Planes

GPMR6002 Thin Pro CA 1 oz.

GPMR6008 Medium Pro CA+ 1 oz.

GPMR6045 Pro 6-Minute Epoxy 9 oz.

High-quality Pro Adhesives provide

model building's best bonds...and a

"Best If Used By" date on the label for

visible proof of freshness! Thin-

formula Pro CA offers instant bonds,

curing in just 1-3 seconds – it's ideal for most assembly

needs. Medium CA+ is an excellent gap filler that cures in

10-15 seconds for a little more positioning time. The

uniquely precise cure time of Pro 6-Minute Epoxy allows

you to continue building with the confidence that epoxied

parts won't be accidentally bumped out of alignment.

Futaba

S3003 Standard Servo

(FUTM0031)

This standard servo with preinstalled, round servo horn is

ideal for car, boat and other applications. It comes with "J"

connector on a 5 in. lead and hardware, including four brass

eyelets, four rubber grommets, four mounting screws, and

large and small "X" horns. Speed: 0.23 sec/60 degrees

(4.8V). Torque: 44.4 oz-in (4.8V). Weight: 1.31 oz [37.2g].

Dimensions: 1.59 x 0.78 x 1.42 in [40.4 x 19.8 x 36mm].

Pro

™

Adhesives

Great Planes

(GPMR8025)

These pliers automatically locate the precise Z-bend point

for maximum servo arm performance – and they're so easy

to use, even inexperienced modelers can make perfect

Z-bends in minutes. Just insert the pliers' alignment pin into

the servo horn hole that your pushrod will be connected to,

and lightly hold the music wire where the bend will be

placed. Remove the pliers from the servo horn, squeeze the

handles, and make the bend...exactly where you need it!

Works with wire up to 1/16" in diameter.

Great Planes

C.G. Machine

(GPMR2400)

Every flier needs this ingenious tool! For optimum

performance – or to achieve specific flight characteristics –

every plane must be balanced correctly. Yet checking the

balance in the "traditional" way (by hand) has always been

difficult and imprecise. The C.G. Machine makes balancing

easy and exact: Its slanted wire balancing posts accept any

plane up to 40 lb...built-in rulers position it exactly at the

recommended center of gravity. There's no guesswork!

Precision Z-Bend Pliers

™

Airplane Balancer