GREAT PLANES YAK 55 Buku Petunjuk - Halaman 10

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Mainan GREAT PLANES YAK 55. GREAT PLANES YAK 55 16 halaman. 3d ep with flightflex

❏

8. Press a plastic z-bend clevis into each of the four

control horns. Trim the inside of the hole in the control horn

to ease the installation of the clevis.

❏

9. Glue a control horn into the underside of the elevator half.

Position the control horn as far forward as possible.

❏

10. Secure the back side of the control horn with a control

horn retainer. Secure it with a small bead of glue.

❏

11. Install a control horn into the right side of the rudder

using the same procedure.

❏

12. Install control horns in the underside of the ailerons

using the same procedure.

❏

13. If necessary, remove the servo arms from all of your

servos. Find 4 long output arms with the spline size that fits

your servos. Press a plastic z-bend clevis into the outer hole

on each of these arms. Trim the hole in the arm to ease the

installation of the clevis.

❏

14. Install the receiver and ESC into the fuselage. Plug

the servos into the receiver and temporarily install the

battery into the fuselage. Center all servos with your radio.

❏

15. Attach the servo arm to the elevator servo pointing

straight up. Secure the arm with the screw included with the