DayStar Filters SolaREDi 66 Manual - Halaman 3

Jelajahi secara online atau unduh pdf Manual untuk Teleskop DayStar Filters SolaREDi 66. DayStar Filters SolaREDi 66 17 halaman.

USAGE:

The SolaREDi 66 is a 66mm F/14 refractor with an integrated telecentric

baffled barlow and Hydrogen Alpha narrowband filter for dedicated solar

observing.

The filter must be plugged in using the supplied power supply. The

etalon cavity is precision heated to regulate the wavelength of the filter

output.

Any other USB power source you wish to use must be rated for at least

1.5 amps at 5 volts. Computer USB ports and cell phone chargers do

not normally support this much power.

After letting the filter come up to temperature and settle, the light will turn

green and viewing can begin.

Finder Usage:

The included zero power finder allows you to find the sun. With your

back to the Sun, observe the dot of light that passed through the front of

the finder on the target. Move the telescope pointing until the dot of light

is in the center of the target. Then, using a low power (long focal length)

eyepiece such as a 25mm-40mm, locate the sun through the telescope

eyepiece and center it.

Due to normal manufacturing variations in the finder, telescope, and

eyepiece, the dot may not land in the middle of the target when the Sun

is centered through the eyepiece. In this instance, center the Sun in the

eyepiece, then use a 3/32" hex L wrench (not included) to loosen the

screw holding the target and move the target plate so that the dot aligns

with the target. Then carefully tighten the screw.