DayStar Filters SolaREDi Odyssey Panduan Pengoperasian - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Teleskop DayStar Filters SolaREDi Odyssey. DayStar Filters SolaREDi Odyssey 6 halaman. Hydrogen alpha solar telescope

Halaman Cetak

DayStar Telescopes and filters are all HAND MADE.

• Each instrument is hand manufactured and assembled one-by-one. Each is unique.

Slight variations in construction that do not affect performance may occur.

• Each instrument is indivudually tested on the Sun. Sun testing is an absolute necessi-

ty to assure quality performance. While every precaution is taken to maintain the 'like

new' appearance of the telescope, it may encounter minor cosmetic smudges or abra-

sions on the mounting foot or the drawtube during testing.

• The optical filter stack is assembled by human hands using special optical couplant

that must remain loose for over 10 years. Occasionally, if disturbed, this couplant can

migrate to optical surfaces. Do not disturb your optical stack. If a small amount of

couplant is smudged onto your outer surfaces, it is best not to disturb it. It will not

affect performance, like a large mirror. Larger smears will need to be cleaned by tech-

nicians at our factory.

Warranty:

The SolaREDi Odyssey telescope is warranted to be free of manufacturing

or workmanship defects for 5 years from the date of purchase. If your SolaREDi

Odyssey telescope requires warranty service, please contact DayStar Filters to discuss

the defect, upon which you will receive a return authorization. NO RETURNS ARE

ACCEPTED WITHOUT PRIOR AUTHORIZATION.

The warranty does NOT include: collimation, defects caused by mis-handling, exces-

sive or inappropriate weather exposure, optical cleaning, or opening the optical filter

assembly, defects of a subjective nature, coverage for any telescope purchased

through an unauthorized DayStar Filters dealer.

Warranty work will be performed at DayStar Filter's discretion and may only be per-

formed at the DayStar Filters laboratory. The telescope must be shipped in its case

with proper inner and outer packaging. Return shipping and insurance charges are the

purchaser's responsibility.

Special note about opening the filter compartment:

Sadly, about 1 out of 10 filters returned for service at DayStar have been opened by

the owner in an attempt to repair the filter themselves. These opened filters are

always damaged by the act of opening the optical compartment, requiring more

expensive repair services than if the unit was left intact. In consideration for the over-

all health and longevity of your telescope, we hope you will not ever choose to open

the optical compartment of your SolaREDi.

Standard features of the SolaREDi telescope include:

1375mm F/23 doublet telescope with

2" Dual Speed crayford focuser with 4.5" drawtube with dual rate knob,

an internal 'visual hot mirror' reflective Energy rejection filter,

an internally configured TeleVue 4X Televue Powermate barlow lens,

a DayStar Filters sub-angstrom bandpass Hydrogen Alpha filter assembly and

TeleVue 'Sol-Searcher' solar finder.

Tuning:

Temperature affects the tuning of your SolaREDi telescope. Your SolaREDi

telescope is equipped with a precision electronic tuning system which will automat-

ically control the heat and thusly the tuning of your telescope. Just plug in the power

supply, wait for the light to change from yellow to Green. Once the light is green,

your telescope is now on band and ready to view.

detent stop position which marks the ideal tuning location of the telescope to pass

Hydrogen Alpha light. Be sure the knob has stopped on this detent stop position

located in the center of its range of travel for guaranteed operation.

Mounting:

The SolaREDi combination mounting foot may be threaded directly to a

¼ x 20 standard camera tripod mount, or using industry standard "Vixen" style

dovetail mounting accessories. With heavier 2" eyepieces or equipment, we dis-

courage camera foot mounting. Users may consider a tracking mount for best

results. The included dual-speed focuser may be rotated with adjustments to the

allen screws found in front of the red focuser section.

Focus considerations:

We designed the SolaREDi with a wide variety of focus

options and focus range. In conjunction with the 4X powermate, the actual focus

travel is magnified by 4 times. Therefore, only minor movements in focus on the

knob are required to accomplish large changes visually. Most eyepieces and cam-

eras focus with the tube extended approximately 2.5- 3" out.

The two adjustment knobs on the under side of the focuser aredesigned to adjust

tension of the crayford style focuser and to lock the focuser down.

The adjustment screw toward the FRONT of the telescope is FOCUS LOCK.

The adjustment screw toward the BACK of the telescope is FOCUS TENSION.

The TUNING KNOB has a center