DayStar Filters Magnesium Quark Eyepiece Panduan Pengguna

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Aksesori DayStar Filters Magnesium Quark Eyepiece. DayStar Filters Magnesium Quark Eyepiece 17 halaman.

Halaman Cetak

0/\YST /\ia FILTEiaS

MAG"'-IESIUM QUARK

Congratulations on your purchase of a Quark Magnesium

"Eyepiece"

solar

filter.

Please read this manual before using the product.

To use the filter, plug in the included power

supply,

then place the

Quark after your telescope's diagonal and insert an eyepiece or

camera in the rear of the filter. Turn the knob to point straight away

from the LED light.

When the light turns green in about 5-10

minutes your viewing experience can begin.

To prevent damage, we recommend using an Energy Rejection Filter on

telescopes of 80mm aperture or

more,

or when tracking the Sun for long

periods. This can be a UV/IR cut filter mounted before the diagonal, or a

full aperture red or yellow glass ERF mounted in front of the telescope

Daystar Quark Configuration on Refractor

with Rear Mount UVfIR Cut ERF

- Eyepiece

(25-40mm Plossl)

- D/WSTI\a

QUARK

- Diagonal

Warnings:

Do not disassemble the filter, the blocking element is separated from the

etalon and the complete assembly must be used together for safe

viewing

Do not power the filter from a computer or cell phone charger as the

Quark requires a high current power supply (> 1.5A) for operation

For

assistance:

Call:

1 (866) 680-6563

service@daystarfilters .com

Visit:

http://www.daystarfilters.com