HiB ACSSWHI01 Petunjuk Pemasangan

Jelajahi secara online atau unduh pdf Petunjuk Pemasangan untuk Perlengkapan Kamar Mandi HiB ACSSWHI01. HiB ACSSWHI01 2 halaman. Shower seat

ACSSWHI01

Installation Guideline

• Using a suitable drill bit, drill holes in the marked positions to a suitable depth. If

drilling through tile, use a ceramic drill bit.

• Insert wall plugs level with the surface of the wall. If ﬁtting to a tiled surface, wall

plugs should be inserted below the tile surface to avoid cracking. NB. For plaster-

board walls, specialist ﬁxings should be purchased, available from any DIY or

hardware store.

• Fig.5 - Ensure the retaining grub screw is installed securely.

Care Instructions

• Do not use abrasives or solvents when cleaning this product.

• Wipe oﬀ all water spillages as soon as possible using a soft, damp cloth.

The wall mounted folding shower seat is designed to withstand a maximum vertical

static load of 120 kg, exceeding this loading limit may lead to permanent damage.

Please use the ﬁxing kit included (Fischer DuoPower 10x50 wall plug and M8 screw) for

installation on concrete and solid brick walls. Other wall structures, such as aerated

concrete, perforated blocks or pre-wall mounting systems with plasterboard requires

special ﬁxing kits. For plasterboard walls, specialist ﬁxings must be purchased, available

from any DIY or hardware store or contact Product Support on +44 (0)20 8441 0352 for

Shower Seat - Fitting Instructions

WARNING

more information.

FI#10 016 R200622

1200N

～120kg

Ver No.

1.0 Oct 2020