Great Stuff RoboReel Water Hose Reel Panduan Pengguna - Halaman 15

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Kebugaran Great Stuff RoboReel Water Hose Reel. Great Stuff RoboReel Water Hose Reel 20 halaman. Roboreel water hose reel

Halaman Cetak
7. Synchronize   H ose   R eel   A ccessories  
(Required when replacing RoboReel Top Cover, Remote Control, or Water Valve)
Instructions for synchronizing each accessory are detailed below. These accessories will arrive already synched with your RoboReel. It
should only be necessary to re-synchronize an accessory if it is replaced. If the Remote Control or the Water Valve needs to be
replaced, only that new device must be re-synchronized with the unit in order for the RoboReel to function correctly.
If you receive a new Top Cover, all of the other radio devices (listed below) will need to be re-synched, as described below.

7.1 Synchronizing Remote Control

1.
On the Remote Control, press the Home and Water buttons at the same time. The LED on the Remote Control will flash three
(3) times.
2.
Press the Retract Button on the Top Cover of the unit. The LED on the Remote Control will flash three (3) times again
confirming it has been synchronized with the unit.
NOTE: The above steps in 7.1 must be completed within 15 seconds in order to complete synchronizing. These steps may be repeated
if necessary to complete synchronizing.

7.2 Synchronizing Water Valve

1.
Remove the Water Valve Battery Pack from the Water Valve, and then re-insert the Battery Pack. The Valve will open and
close momentarily.
2.
Press either the Retract Button or the Home button on the Remote Control. The Valve will open and close momentarily,
indicating the Valve is synchronized with the unit.
NOTE: The above steps in 7.2 must be completed within 15 seconds in order to complete synchronizing. These steps may be repeated
if necessary to complete synchronizing.

7.3 Synchronizing Retract Button

1.
Remove the Top Cover and insert the Main Battery. You will hear a "ready-to-go" tone.
2.
Leave the Top Cover OFF.
3.
Press the Retract Button. Three (3) beeps from the unit indicate that the Retract Button is synchronized with the Hose Reel.
NOTE: The above steps in 7.3 must be completed within 15 seconds in order to complete synchronizing. These steps may be repeated
if necessary to complete synchronizing.
4.
Replace the Top Cover.
5.
Complete all steps in Sections 7.1 and 7.2. The accessories can be synchronized in any order. But the synchronization
process must be completed for the Retract Button, the Water Valve, and the Remote Control if the Retract Button is replaced.
6.
Replace the Top Cover and begin using the Hose Reel.
 
8. Accessories   a nd   R eplacement   P arts  
The following accessories and parts are available for replacement from www.roboreel.com or 888-GR8-STUFF (888-478-7883).
Nozzles
Sweeper Tip Nozzle
•
Fireman Nozzle
•
Adjustable Nozzle
•
Multi-functional Spray Nozzle
•
Fan Nozzle
•
Batteries and Other Accessories
Sprinkler
•
Main Battery
•
Main Battery Charger
•
Water Valve Battery Pack
•
 
12