Automated Logic ZS Pro-F Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Aksesori Automated Logic ZS Pro-F. Automated Logic ZS Pro-F 16 halaman.

ZS Plus Sensor

Slide the sensor's potentiometer up to make the zone warmer or down to make it cooler. The control

program determines how much you can adjust the setpoint.

Timed override to an occupied state

Press the

button one time to override the schedule and put the zone in an occupied state for a

length of time specified in the control program's Maximum Duration field.

Press the

button again to cancel the override and return control to the schedule.

Force to an unoccupied state

If allowed by the control program, press and hold the

unoccupied state.

Press the

button again to cancel the force to unoccupied and return control to the schedule.

ZS Sensors

Rev. 4/27/2015

A ZS Plus lets you:

•

Make the zone warmer or cooler

•

Override the schedule to put the zone in an occupied state

•

Force the zone to an unoccupied state

•

See that the zone is in an occupied state when the green LED is

lit

button for 3 seconds to force the zone to an

ALC Proprietary and Confidential