Emergency Caller Products EC-4 Panduan Referensi Cepat Pemrograman - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Referensi Cepat Pemrograman untuk Sistem Keamanan Emergency Caller Products EC-4. Emergency Caller Products EC-4 7 halaman.
Halaman Cetak1-800-227-1592 www.emergencycaller.com
4. Press R and hold down to record. Message must be at least 10
seconds in duration, up to 52 seconds in length. If you do use all 4
channels, each message can be no longer than 13 seconds, 52
seconds total. The EC4-P1S EC4-PFH are single channel system so
message can be up to 52 seconds
5. Press 1 to listen to message or Press 2 to move to acceptance.
6. Press 1 to accept outgoing message or Press 2 to re-record
message.
Enable or Disable Microphone
We suggest that you "do not" disable the 1 way or 2 way feature of your
Emergency Caller. This feature is a great way to communicate with your
loved one during the emergency. Called party will push 1 when called to
activate this 2 way communication feature and the a 2 to activate the 2
way communication feature. This feature will continue for 60 seconds.
You can reactivate this 2 way feature by pushing a 1 followed by a 2 if you
are the party called by the emergency caller and able to pick up on actual
emergency call.
1. Press 2 to keep microphone active.
2. Press 1 to deactivate the 1 and 2 way communication feature.
Program Channels – This product has 4 channels to allow up to 4
transmitters or sensors to trigger EC4 to call.
1. Press 1 to proceed with channel enable.
2. Press 1 to 4 to select the channel you intend to enable to use. Each
channel represents a different transmitter or sensor.