DAYTEK SINGLE Panduan Produk - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Produk untuk Rak dan Dudukan DAYTEK SINGLE. DAYTEK SINGLE 8 halaman. Easy lock fold down clotheslines

3. ATTACH SIDE ARMS AND STRUTS

3.1 Press 4 x Wall Bracket Bushes into each

Side Arm & Strut Assembly (See Figure 3A)

3.2 Fasten a Side Arm & Strut Assembly to

each Wall Bracket using the supplied Nuts

& Bolts (13mm) (See Figures 3B–3D)

NOTE: Do not overtighten the nuts. The Side Arm

& Strut must be free to pivot. If the assembly

is overtightened your clothesline may not

operate correctly.

4. INSTALL FRONT BAR

4.1 Attach the Corner Brackets to the

Front Bar and secure with nuts & bolts

(10mm) (See Figure 4A–4C).

4.2 Lock each side arm into the upright

position. To do this gently lift each Side

Arm upwards to the maximum point of travel

and then release. (refer to lifting and folding

diagrams)

4.3 Install the Front Bar to the Side Arms and

secure with nuts & bolts (See Figure 4D–4E).