Daytona 64201 Panduan Pemilik & Petunjuk Keselamatan - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Pemilik & Petunjuk Keselamatan untuk Jacks Daytona 64201. Daytona 64201 13 halaman. 4 ton floor jack
Halaman Cetak
Troubleshooting
TO PREVENT SERIOUS INJURY:
Use caution when troubleshooting a malfunctioning jack. Stay well clear of the supported load.
Completely resolve all problems before use. If the solutions presented in the Troubleshooting guide
do not solve the problem, have a qualified technician inspect and repair the jack before use.
After the jack is repaired: Test it carefully without a load by raising and lowering it fully,
checking for proper operation, BEFORE RETURNING THE JACK TO OPERATION.
DO NOT USE A DAMAGED OR MALFUNCTIONING JACK!
Jack will
Saddle
not lift at
lowers
capacity
under load
does not lift all the way
X
X
X
X
X
Email our technical support at: [email protected]
Floor Jack
POSSIBLE SYMPTOMS
Pump stroke feels
Handle moves
spongy or Saddle
up when Jack
under load
X
Visit our website at: http://www.harborfreight.com
For technical questions, please call 1-888-866-5797.
Fill Plug leaking
oil or Jack will not
lower without a load
X
X
PROBABLE SOLUTION
(Jack must not be supporting a load
while attempting a solution.)
Check that Release Valve
is fully closed.
Bleed trapped air from the hydraulics.
Valves may be blocked and may not
close fully. To flush the valves:
1. Lower the Saddle and securely
close the Release Valve.
2. Manually lift the saddle
several inches.
3. Open the release valve
and force the saddle down
as quickly as possible.
Jack may be low on oil.
Check the oil level and fill if needed.
See step 4 on facing page.
Jack may have air trapped
in the hydraulics.
Follow instructions for
Bleeding Trapped Air on page 6.
Jack may have too much
hydraulic oil inside, check
fluid level and adjust if needed.
Fill Plug
Oil
Piston
Cylinder
fill level
Page 9