HIBLOW hp-150 Buku Petunjuk - Halaman 7

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Pompa Kolam HIBLOW hp-150. HIBLOW hp-150 13 halaman. Air pumps
Juga untuk HIBLOW hp-150: Manual (8 halaman), Buku Petunjuk (17 halaman)

Halaman Cetak

Cleaning the filter (Refer to Fig.3)

REPLACEMENT FILTERPAD PART#

HP-40

HP-60/HP-80

HP-100/HP-100LL/HP-120/HP-120LL/HP-150/HP-200

Undo the truss screw securing the cover to the pump housing, and remove the Filter pad.

Gently dust the Filter pad then hand-wash in mild soapy water and be sure to dry well before

reinstalling

Replace the Filter pad and cover. Secure with the truss screw.

Fig. 3

Changing the Pump (Chamber) Assembly-HP Series

REPLACEMENT PUMP ASSEMBLY PART#

HP-40

HP-60/HP-80

HP-100/HP-120

HP-100LL/HP-120LL

HP-150/HP-200

Remove the Head (Casing) block

Remove the four corner screws(Refer to Fig.4- ), and the Upper housing. (Refer to Fig.4- ) If

stuck, insert screwdriver between exhaust outlet and Upper housing, and gently pry apart.

Remove the Sound absorber. (Refer to Fig.4- , except for HP-40, HP-100LL, HP-120LL)

Remove the screws from all the corners of Frame cover for subsequent removal of the Frame

cover. (For HP-100/120, Refer to Fig.4- )

Undo the hose band and remove the L-tube from the Head (Casing) block.

Remove screws attaching the Head (Casing) to the pump mechanism, and remove Head

(Casing) block. (Refer to Fig.4- . For HP-100/120, Refer to Fig.4- )

40PA000010

80PA000040

120PA20010

Screw

Filter cover

Filter

40PC000030

Head (Casing) block

80PC000041

Diaphragm mounting block

120PC20011

Hex nut (U-lock nut) / washer

120PC20021

Safety screw / plastic nut (HP-60 and over)

200PC20011

(Refer to Fig.4)

Upper housing

CONTENTS