GREAT WATER M1D2 Penginstal dan Panduan Pengguna - Halaman 3

Jelajahi secara online atau unduh pdf Penginstal dan Panduan Pengguna untuk Dispenser Air GREAT WATER M1D2. GREAT WATER M1D2 8 halaman.

CHECK

Check that you have the correct installation kit for your application before commencing the works.

• 15mm Standard Kit (SK-15) – Suitable for Conventional plumbing systems with roof tanks.

• 15mm High Flow Kit (HFK–15) – Suitable for 15mm systems with mains fed appliances

e.g. Combi Boilers, Electric Showers etc.

• 22mm Pressurised System Kit (PSK–22) – Suitable for unvented and pressurised systems

with 22mm plumbing connections.

Available from your merchant supplier.

WATER PRESSURE – Be Careful – Daytime pressure of 3.5 Bar (50 psi) can easily exceed

100psi overnight. If in doubt fit a pressure limiting valve set to 5 bar.

2. Inlet and Outlet Connections

Connect the elbow end of the hoses provided to the inlet and outlet connections on the rear of

the softener.

Important: under no circumstances should you use washing machine hoses or plumb the water

softener in solid copper pipe.

A = Inlet Connection

B = Outlet Connection

C= Overflow Connection

D = Waste connection