HIBLOW hp-200 Buku Petunjuk - Halaman 4
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Pompa Kolam HIBLOW hp-200. HIBLOW hp-200 17 halaman. Air pumps
Juga untuk HIBLOW hp-200: Buku Petunjuk (13 halaman), Manual (8 halaman)
Halaman Cetak
CAUTION
1. Installation Place
(1) Install the pump in a well-ventilated place.
(2) Choose a place which has no risk of inundation.
(3) Install the pump unit close to an aeration tank (within 5 meters).
(4) Avoid installing the pump in a bedroom or other places where noises may be a nuisance.
(5) Install the unit in a place that provides easy access for inspection and maintenance.
(6) This pump is designed for outdoor use, requiring no cover to be placed.
2. Installation method
(1) Make an installation foundation with a height of at least 10 cm from the ground, using con-
cretein a manner that its surface is flat and horizontal.
(2) Use a hard PVC tube VP-13 or VP-20 for tap water use as air piping.
(3) Place the pump unit properly on the foundation and check that it is horizontal. But, at this
stage,do not turn on the pump yet.
(4) Connect the PVC tube to the pump outlet with a straight hose as shown in the figure below,
then firmly tighten the connection with the hose band. When using VP-13, use a small diameter
end of a straight hose supplied as an attachment.
(5) The appliance must be grounded by a qualified electrician using the grounding terminal ( ) of
the pump.
(6) Provide a waterproof type plug socket for pump use only.
(7) Fill the water-purifier tank up to the specified level, then turn on the pump to supply air into
thetank.
Pump
Concrete
foundation
Hose band
PVC
connection
tube
4
PRECAUTIONS FOR INSTALLING THE PUMP
Straight hose which has different ends (supplied)