Automatic SA200-A Buku Petunjuk - Halaman 6

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Sander Automatic SA200-A. Automatic SA200-A 11 halaman. 200w 1/3 sheet sander

Halaman Cetak

i) Children should be supervised to ensure

that they do not play with the appliance.

5) Service

a) Have your power tool serviced by a

qualified repair person using only identical

replacement parts. This will ensure that the safety

of the power tool is maintained.

b) Follow instruction for lubricating and

changing accessories.

c) Keep handles dry, clean and free from oil

and grease.

Additional safety rules for sanders

Remove the plug from the socket before

carrying out any adjustment, servicing or

maintenance.

• Fully unwind cable drum extensions to avoid potential

overheating.

• When an extension cable is required, you must ensure it

has the right ampere rating for your power tool and is in a

safe electrical condition.

• Ensure your mains supply voltage is the same as your tool

rating plate voltage.

• Your tool is double insulated for additional protection

against a possible electrical insulation failure within the

tool.

• Always check walls, floors and ceilings to avoid hidden

power cables and pipes.

• After long working periods external metal parts and

accessories could be hot.

• Do not force the sander; let the tool do the work at a

reasonable speed. Overloading will occur if too much

pressure is applied and the motor slows resulting in

inefficient sanding and possible damage to the sander motor.

• When sanding wood, always connect the dust extraction

filter.

• Take special care to guard against harmful and toxic dusts

when sanding lead-based painted surfaces, woods and

etals, including the following:

– All persons entering the work area must wear a mask

specially designed for protection against toxic dust and

fumes such as those arising from the sanding of lead

paint.

– Children and pregnant women must not enter the work

area.

– Do not eat, drink or smoke in the work area.

• Before using the sander with metal always remove the

extraction filter from the outlet as sparks may ignite the

dust or the internal bag.

• Do not continue to use worn, torn or heavily clogged

sanding sheets.

• Do not touch the moving sanding sheet.

• Ensure that you have removed foreign objects such as

nails and screws from the work before commencing

sanding.

• Rags, cloths, cord, string and the like should never be left

around the work area.

WARNING: We recommend the use of a residual current

device with a residual current rating of 30mA or less.

Wear goggles

Wear ear muffs

Wear a breathing mask