HiBoost C27G-5S-TRUCK Panduan Pengguna - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pemanjang HiBoost C27G-5S-TRUCK. HiBoost C27G-5S-TRUCK 13 halaman.
Halaman Cetak
H"1oosT
3. Plug-in the DC power supply and power on the booster
Note: The booster will flash blue lights that will last for about 20 seconds while it
is adjusting to the current network environment.
Troubleshooting Guide
Alarm LED
Bluetooth LED
I
Common Issues
The vehicle booste
there's still no signal
The signal is not stable after turning on
the booster power
The Alarm LEDs a
e quick flashing
『
blueor red or off
There is No Power
Outdoo「Antenna
二
产
—一二—－
LED STATUS INDICATORS
Solid blue
Slow flashing blue
Quick flashing blue
Quick flashing red
Slaw flashing blue
Quick flashing blue
is installed but
『
8/12
Below full output powe
Full output power
Output powe
is too high
『
Booster will automatically shut down
excessive downlink signal
Bluetooth disconnected
Bluetooth connected
Troubleshooting Instructions
Check to see if the vehicle is started.
Double check connections to make
sure none are loose.
Check that the outdoor signal is stable
by referring to your mobile device and
checking your coverage.
Check to make sure vehicle is not
parked too close to a cell tower.
Check that the booster is turned on and
the DC power outlet is plugged into the
DC 12V port or lighter adapter
『
I