HiBoost F23 Panduan Pengguna - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pemanjang HiBoost F23. HiBoost F23 19 halaman.

feeder line to avoid water or other kinds of damage.

2. Install Indoor Antenna

According to the requirement of practical application, please select Indoor panel

antenna, or Omni-ceiling antenna as indoor antenna for coverage

Install indoor panel as reference.

Step1: Select a place on a wall projecting the area where you want reception.

Normally, to provide an overall coverage, you will need to choose a corner.

Step2: Mount the bracket on the wall after drilling the screw to the wall.

Step3: Put the panel antenna on the bracket.

When you choose Indoor ceiling omni antenna or whip antenna, the best place to

install it is the center of your house as the graph shows.

Step1: Select an indoor location near to a power outlet on a wall.

Step2: Mount the booster with the screws included as shown in the figure.

Step3: Connect the outdoor antenna cables to booster connector marked

"outdoor". Tighten the connection with hand or wrench.

Step4: Connect the indoor antenna cables to booster connector marked "indoor".

Tighten the connection with hand or wrench.