HiBoost Home 4K Panduan Pengguna - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pemanjang HiBoost Home 4K. HiBoost Home 4K 20 halaman. Mobile signal booster

LCD Features

Working

Uplink

Downlink

Frequency

Gain

Output

Power

Relative signal

power from tower

Alarm

status Indicator

power status

ISO

Antenna Isolation

Automatic Level Control

(ALC)Activity Indicator

SET

DEC-

|NC+

Band: Shows the working frequency bands where the amplifier is operating.

UL/DL: Shows real-time uplink and downlink gain(dB). These values will change

slightly as the ALC or ISO makes changes to the gain to optimize coverage.

Power: Shows real-time downlink power(dBm) that the amplifier is delivering to

the indoor antenna port. When the amplifier DL output power is lower than -

IOdBm, the value will display "---".

ISO: When the system does not have enough isolation between the outdoor and

indoor antennas, the "ISO" indicator will be flashing showing that the ISO has

lowered the gain in some bands to keep the system from oscillating. Press the

"SET" key and the LCD screen will display "ISO" value showing the current band

or bands affected.

ALC flash

ALC: When the booster is receiving too much DL power from the tower and the

DL amplifier output is close to saturating, the "ALC" indicators will flash showing

that the ALC has lowered the gain to prevent this overload condition. Press the

"SET" button and the screen will show the band or bands affected.

I80 flash

Band

LTE7BB

CellBEB

P081900

AHSZlDB