DaytonAudio MCWA60 Panduan Pengguna - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penguat DaytonAudio MCWA60. DaytonAudio MCWA60 4 halaman. 60 watt class d plate amplifier with wi-fi and bluetooth 4.0 aptx
Halaman Cetak
REMOTE CONTROL
POWER – Toggles the power state of the amplifier from STANDBY to ON. When the unit is ON, the
indicator LED will illuminate BLUE. When the unit is in STANDBY, the indicator LED will illuminate
RED. (Note: Turning OFF the rear power switch will turn power completely off to the unit, disabling
the remote.)
VOLUME – Adjusts the volume level of the amplifier. If the source device has a volume control in
itself, set the volume to full then control the volume with the MCWA60 volume control. As the volume
increases or decreases the blue indicator LED will flash. When volume is at min or MAX, the blue
indicator LED will not flash.
MUTE – Press once to temporarily mute the amplifier. The blue indicator LED will flash slowly while
the MCWA60 is muted.
PLAY/PAUSE
– Press once to play or pause program audio in Bluetooth mode only.
PREVIOUS/SKIP
– Press to move to the beginning of the current song or advance
to the next song in Bluetooth mode only.
AUX 1/2 – Press once to switch to the corresponding analog input on the amplifier. The blue
indicator LED will flash once.
OPTICAL – Press once to switch to the S/PDIF Toslink input on the amplifier. The blue indicator LED
will flash once.
BLUETOOTH – Press to switch to and pair with the Bluetooth input on the amplifier. The blue
indicator LED will flash once.
WiFi – Press once to switch to and pair with the Wi-Fi input on the amplifier. The blue indicator LED will flash once.
OPERATION
Once you have completed the installation of the MCWA60 into your project, it is best to test the system using a known operating
source component connected to one of the analog inputs. The default state of the amplifier at power-ON is to enter STANDBY
mode; use the remote to turn the power on and select an input to begin listening.
PHYSICAL CONNECTION
Connect an audio source to any of the three external inputs. Permanent connection of sources including CD/BD/DVD players,
television/satellite/cable boxes, game consoles, and other sources are best supported using the OPTICAL or AUX 1 (RCA) inputs,
while portable music players and PCs are best supported by the AUX 2 (3.5mm) input.
WIRELESS CONNECTION – BLUETOOTH
®
Bluetooth connectivity provides an easy, wireless connection for a personal audio device such as a tablet or mobile phone. The
MCWA60 utilizes a Bluetooth 4.0 transceiver featuring aptX
®
decoding for CD quality audio, and also supports legacy A2DP ,
AVRCP , HFP , and HSP Bluetooth audio profiles. This is a Class II Bluetooth receiver with a range of approximately 10 meters.
To pair your device, put the phone or tablet into pairing mode. Press the Bluetooth button on the remote control. Press "scan"
on the phone or tablet and select the device labeled "DABTA". The blue indicator LED will illuminate brightly to show pairing was
successful.
Note: The remote control functions PREVIOUS, SKIP , PLAY, and PAUSE are only available for use in Bluetooth mode.
WIRELESS CONNECTION – Wi-Fi
The Wi-Fi connection in the MCWA60 operates using the same principles as your home Wi-Fi internet connection; however,
the MCWA60 does not connect to your home Wi-Fi or to the internet. Instead, it creates its own Wi-Fi network, which your
source device connects to. The Wi-Fi connection provides an easy, wireless connection for a personal audio device such as a
smartphone, tablet, or PC.
Note: Each MCWA60 is assigned a unique Wi-Fi Serial Identifier. This number can be found on the amplifier's face (same as
serial number). If using multiple MCWA60s, this Serial Identifier will allow you to determine which plate amp you are connected to
via your Wi-Fi connection.
Open the Wi-Fi settings in your smartphone, tablet, or PC. Press the Wi-Fi button on the remote control. Scan for Wi-Fi networks
and select the network labeled DAWAXXX, where "XXX" is a unique string of numbers assigned to the Wi-Fi module. Once you
have selected the appropriate DAWAXXX Wi-Fi amplifier, Enter 12345678 when you are prompted to enter a Wi-Fi password.
You will not be required to re-enter this in the future. Note: In most cases your smartphone, tablet, or PC will lose internet Wi-Fi
connectivity while connected to and streaming audio to the MCWA60 amplifier.
STANDBY MODE
The MCWA60 will automatically switch to standby mode if no signal is sensed for 15 minutes. When a signal is sensed, the MCWA60
will "wake-up" automatically and begin to operate. Power consumption in standby mode is less than 0.5W.
(3)