DaytonAudio WF60PA Panduan Pengguna - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penguat DaytonAudio WF60PA. DaytonAudio WF60PA 4 halaman. 60w class d full range 2.1 plate amplifier with wi-fiand bluetooth 4.0 aptx
Halaman Cetak
REMOTE CONTROL
POWER – Toggles the power state of the amplifier from STANDBY to ON. When the unit is ON, the
indicator LED will illuminate BLUE. When the unit is in STANDBY, the indicator LED will illuminate
RED. (Note: Turning OFF the rear power switch will turn power completely off to the unit, disabling
the remote.)
VOLUME – Adjusts the volume level of the amplifier. If the source device has a volume control in
itself, set the volume to full then control the volume with the WF60PA volume control. As the volume
increases or decreases the blue indicator LED will flash. When volume is at min or MAX, the blue
indicator LED will not flash.
MUTE – Press once to temporarily mute the amplifier. The blue indicator LED will flash slowly while
the WF60PA is muted.
PLAY/PAUSE
– Press once to play or pause program audio in Bluetooth mode only.
PREVIOUS/SKIP
– Press to move to the beginning of the current song or advance
to the next song in Bluetooth mode only.
AUX 1/2 – Press once to switch to the corresponding analog input on the amplifier. The blue
indicator LED will flash once.
OPTICAL – Press once to switch to the S/PDIF Toslink input on the amplifier. The blue indicator
LED will flash once.
BLUETOOTH – Press to switch to and pair with the Bluetooth input on the amplifier. The blue
IR REMOTE
indicator LED will flash once.
WiFi – Press once to switch to the Wi-Fi input on the amplifier. The blue indicator LED will flash once.
OPERATION
Once you have completed installation of the WF60PA into your project it is best to test the system using a known operating source
component connected to one of the analog inputs. The default state of the amplifier at power-ON is to enter STANDBY mode; use
the remote to turn the power on and select an input to begin listening.
PHYSICAL CONNECTION
Connect an audio source to any of the three external inputs. Permanent connection of sources including CD/BD/DVD players,
television/satellite/cable boxes, game consoles, and other sources are best supported using the OPTICAL or AUX 1 (RCA) inputs,
while portable music players and PCs are best supported by the AUX 2 (3.5 mm) input.
WIRELESS CONNECTION – BLUETOOTH®
Bluetooth connectivity provides an easy, wireless connection for a personal audio device such as a tablet or mobile phone. The
WF60PA utilizes a Bluetooth 4.0 transceiver featuring aptX® decoding for CD quality audio, and also supports legacy A2DP,
AVRCP, HFP, and HSP Bluetooth audio. This is a Class II Bluetooth receiver with a range of approximately 10 meters. To pair
your device, press the Bluetooth button on the IR remote control, scan for new Bluetooth devices on your phone or tablet and
select the device labeled "WF60PA". The blue LED indicator will flash in pairing mode, when pairing is successful the LED turns
solid blue.
Note: The remote control functions PREVIOUS, SKIP, PLAY, and PAUSE are only available for use in Bluetooth mode.
WIRELESS CONNECTION – WI-FI
The Wi-Fi connection in the WF60PA operates using your home Wi-Fi internet connection. The Wi-Fi connection provides an
easy, wireless connection for streaming music, using the Hi-Fly app, AirPlay
, or DLNA.
®
Open the Hi-Fly app on your smart phone. Ensure your amp is powered on and is in Wi-Fi mode. Follow the in-app directions to
connect your WF60A amplifier to your network.
STANDBY MODE
The WF60PA will automatically switch to standby mode if no signal is sensed for 15 minutes. When a signal is sensed, the WF60PA
will "wake-up" automatically and begin to operate. Power consumption in standby mode is less than 0.5W.
(3)