Greater Goods SOUS VIDE Panduan Pengguna - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Rentang Greater Goods SOUS VIDE. Greater Goods SOUS VIDE 15 halaman.

Scanning: Users usually have a cooking recipe introduction and cooking recipe QR code

on the package of the purchased food. Users can scan and save it in your mobile phone.

When finish setting or choosing the recipe, click "pre-heat" to enter the following interface,

click "Begin", the sous vide start working and send a "DI" beep, the working indicator is

flashing .When the temperature reach the specified temperature, the product will send a

"DI" beep again, then the calculation of the cooking time will be started. The following

figures are the status of the temperature and time before and while the sous vide goes to

work with the APP. Please take for reference.

FIG. 14 Before Working

FIG.15 Start Working

NOTE: Please note that the device does not support 5GHz Wi-Fi network so far. Please

choose 2.4GHz WIFI network, due to the home router general have 5G and 2.4Ghz WIFI,

the signals may switch to each other. Please ask the relevant technicians to disable the

switching functions between 5GHz and 2.4GHz. In additional, please confirm that the

WIFI is not hidden. If WIFI is hidden, your mobile phone can recognize the WI-FI but the

device cannot, then the WIFI network cannot be identified. Please turn off the WIFI hidden

function, and confirm that the WIFI network of the mobile phone connected is the same

one with the sous vide.