Automatic Solutions HB Instalasi & Panduan Pengguna - Halaman 13

Jelajahi secara online atau unduh pdf Instalasi & Panduan Pengguna untuk Sistem interkom Automatic Solutions HB. Automatic Solutions HB 17 halaman. Gsm intercom system

Halaman Cetak
This intercom allows the user to send SMS commands to control the relays and check status as
follows...
*33*5678# - Relay momentary trigger.
*34*5678# - Relay latch ON or hold ON.
*35*5678# - Relay unlatch or switch OFF.
*22#
Status =
OPEN,
Relay =
OFF
Android and Iphone users can download an optional app called GSM-GATE. This app performs 3
main functions..
1)
Speed dials your intercom when the trigger button is pressed.
2)
Sends pre-configured SMS messages to latch and unlatch the relay.
3)
Allow the user to check status like reception level and status of the output and input.
Main Trigger button
Use this to speed
dial intercom and
momentary trigger
the relay.
Latch Relay Button
Sends a pre-
configured SMS to
latch on the relay.
Can be used to hold
open gates or door.
Information about manufacturer.
P a g e
| 13

Control by SMS

Check if door or gate is open or closed
Send the SMS as shown, and the unit will reply showing the status
of the input limit switch (if used), and the relay..
This example shows that the input sensor is in OPEN state, and the
relay is OFF.
If the relay is latched, then the status will change to ON.
If the input limit witch is closed, the status shown will change to
CLOSED.
TIP: If there is not a physical limit switch fitted to the door or gate,
then the status input will always show OPEN.
Using the Optional App
Trigger Gates
Hold
Open
Info screen
Unhold
/Close
Settings screen
Setup screen, to enter sim card number of
intercom & SMS strings.
Un-Latch Relay Button
Sends a pre-configured
SMS to unlatch the relay
if it has previously been
latched. Can be used to
allow gates to close
again.
Status features
Enter new screen to
check signal strength,
stored numbers, gate or
door status.