DaytonAudio XRA25 Panduan Pengguna - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembicara DaytonAudio XRA25. DaytonAudio XRA25 4 halaman. Universal wireless amplified rear speaker system with subwoofer channel

Halaman Cetak

Typical Installation

Operation

Connect the 9Vdc adapter to the transmitter, and the 15Vdc adapter to the receiver. The two adapters have different sized plugs

to avoid confusion. Turn the transmitter and receiver on, the LEDs will turn green in standby mode and blue in active mode.

Turn on the AV system; make sure that the program material has encoded rear channel and subwoofer effects.

Set the system volume to a comfortable level, and then adjust the volume control on the receiver to the optimum level. The rear

channel volume level may initially need minor adjustments, but the rear level will be controlled by the volume of the AVR. In the

AVR speaker setup menu, set the delay time for the rear speakers to approximately 20 milliseconds.

If any interference is experienced with the system; either in the system's audio or with equipment near the wireless system, press

and hold the "M" button on the transmitter and receiver simultaneously, the units will pair automatically.

If no signal is sensed by the system within 17 minutes, the system will enter stand-by mode.

Specifications