Hiboy EX6 Panduan Pengguna - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Skuter Hiboy EX6. Hiboy EX6 14 halaman.
Halaman Cetak
Installing The Headlight
Headlight hole
1
Nut
Headlight
3
1. Shown in Figure 1, insert the screw of the headlight into the headlight hole.
2. Tighten the screw with nut by using the installing tool.
3. Use a hexagon wrench to lock in a clockwise direction.
Installing tool
2
Nut
Hexagon wrench
8
Adjusting The Handlebar Height
Hexagon wrench
Nut
[3]
[2]
[1]
[2]
Nut
Operation steps
:
1. Loosen the [1] screw with a hexagonal wrench as shown in the figure.
2. According to the height adjustment range you need, the minimum height is 10°, the maximum height is 50°, use the hex
wrench to loosen the [2] screw.
3. After adjusting to the proper height, tighten the [1] screw again with the hexagonal wrench.
4. Use the hex wrench to loosen the [3] screw to adjust the handlebar balance.
9