GAI-Tronics 210-001 Buku Petunjuk - Halaman 2

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Telepon GAI-Tronics 210-001. GAI-Tronics 210-001 11 halaman. Corridor telephone

Model 210-001 Corridor Telephone

•

Install a UL Listed lightning arrestor on any phone installed where the phone or phone cable is at

risk of being exposed to lightning strikes. The lightning arrestor must be installed as close to the

phone as possible to maximize the protection. The lightning arrestor must not be installed within the

enclosure supplied with the phone.

•

NEVER touch uninsulated telephone wires or terminals unless the telephone line has been

disconnected at the network interface.

•

USE CAUTION when installing or modifying telephone lines.

•

Install UL Listed telephone line suppressor (customer-supplied) on the telephone line.

Installation

Mounting and Wiring Instructions

1. Use a GAI-Tronics Model 233-001 Security Screwdriver to remove the four tamper-resistant cover

panel screws.

2. Remove the front cover assembly to expose the four mounting holes on the mounting panel. These

holes accept #10-32 screws (customer provided). The length of these screws will depend on the

mounting surface. See Figure 2.

f:\standard ioms - current release\42004 instr. manuals\42004-449b.doc

06/11

Figure 2. Mounting Details

Pub. 42004-449B

Page: 2 of 9