Hiboy P7 Panduan Pengguna - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Skuter Hiboy P7. Hiboy P7 13 halaman.
Halaman Cetak
6. Installing The Headlight
Headlight hole
1
Nut
Headlight
3
1. Shown in Figure 1, insert the screw of the headlight into the headlight hole.
2. Tighten the screw with nut by using the installing tool.
3. Take out the hexagonal wrench and open-end wrench in the tool kit, adjust the headlight to the proper position, and then lock the screws.
Installing tool
2
Nut
Hexagon wrench
8
7. Installing The Saddle
1
3
1. Install the saddle according to the picture.
2. Push the saddle down, pull up or push down to adjust the height.
3. Check to make sure the saddle is fully inserted and adjust it accordingly.
4. Lock the handle.
2
4
9