Dynafold PF-380S Panduan Pengoperasian - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Mesin Lipat Dynafold PF-380S. Dynafold PF-380S 16 halaman. Automated setup folding machine
Safety
lnstructions
Definition of Symbols and Notes
ln this manual following names and signs stand for possible dangers.
Danoer
This Symbol stands
for
immediate
danger threatening
the
life
and health of
persons. Disregarding
these instructions may cause severe damage
to
health
Caution
This symbol stands for an endangering situation that may
occur.
Disregarding
these
instructions
may
lead
to slight injuries
or
damage to
property.
Note
This symbol stands
for
notes, operational
hints and other useful
information.
They are
convenient
for exploiting the machine's functional
abilities.
Danger
Make sure that the machine
is
electrically grounded.
there
is
a
leak of
electricity.
This prevents an electric shock when
Use
the machine at
a
proper supply
voltage.
A
fire
may start
or
the
machine may
bleak
down
if a
higher or lower voltage other than the one printed
on
the machine
is
used, or
if
an
electric
current with
a
frequency that
is not within
the range
of 50
to
60H2.
Do not place any object on this machine.
A
fire may start or electricity may leak
if
water
or
a
foreign object enters
inside
the
machine.
Handle
the power
cord
with
care.
A
fire may
start
or an electric shock may
be
caused
if the
cord
is
dambged, broken, or processed,
if
a
heavy object
is
placed
on the
iord,
or
if the cord
is bent forcibly.
Do not pull
the
power
source plug out
of or put it in the
electric
outlet using a wet
hand.
Otherwise, an electric shock may
be caused.
Do not remove
the cover of this
machine. Otherwise,
an
electric
shock
or
injury may
be
caused.
Do not remodel
this machine. Otherwise, a fire may break out or an electric shock may
be
caused.
lf the machine is
used
when it
is in
an abnormal condition, such as generating heat,
emitting
smoke, and giving out
a
strange
smell, a
fire may break out or an
electric
shock may
be
caused. Turn
off the power switch
immediately
and then pull the power plug out of
the
electric outlet.
Afterward,
consult
with
your
sales
agency.
lf abnormalities such as the power cord generating heat and giving out a strange smell
are
found,
tum off the power swiich immediately and then pull the power plug out of the electric
outlet. Aftenrvard,
consult
your
sales
agency.
lf
a foreign object enters into th€ machine, turn off the power switch first and then
pul{
the
power
plug
out of the
electric
outlet.
Afterward, consult
your
sales
agency.
lf
thunder approaches, pull
the power cord out of the electric outlet to prevent a fire
or
breakdown caused
by
the
falling
of a thunderbolt.
Caution
Do not let hairs,
a
necktie,
or necklace hang above the drive of the
machine.
Doing
so
may
cause an
injury.
Do
not put the machine on an unstable place such as a shaky stand and a slant
floor.
Doing
so
may cause
the machine to drop
or
fall down, causing an
injury.
Do not put
the machine in a moist or dusty
place
an electric shock.
Doing
so may start
a
fire or cause
Be sure
to
pull out
the power cord while holding the
plug.
lf the power plug is
pulled
out
while
holding
the
cord,
a
fire may break
out or an
electric shock may
be caused.
Be
sure
to
pull
the power plug out of the electric outlet first when moving this
machine.
Otherwise, the.cord may
be
damaged, causing
a
fire or
an electric shock.
Be sure
to pull the power plug out of the electric outlet for safety purposes when
this
machine
is not used
for consecutive holidays
or
for other
reasons.